CHIP COLOR SAMPLES
To create a unique floor color treatment which simulates the look of tile or terrazzo, Epoxy Flooring Specialistsoffers a large variety of color plastic chips which are mixed and matched per your preference with any of our many solid epoxy colors.
*Note: the color chart below provides a basic representation of the color. Slight differences may occur in color and appearance. Samples and custom colors available upon request.
*Please be aware that white outline is for online viewing purposes only and will not be on actual flake.
The following are photographs of actual finished floors installed by Epoxy Flooring Specialists. These are just a few examples of epoxy color- chip color combinations to produce the desired effect for any garage, basement, or commercial application. With the many epoxy and chip color combinations we offer, the possibilities are nearly limitless in producing the look of tile with all of the amazing characteristics of epoxy flooring. Got a particular design need? Contact us today and let one of our specialists create a custom floor for you!
The color selector is designed to assist you in making your selection for Cohills Pro Series® Metal Essence Metallic epoxy colors. Cohills Pro Series® Metallic pigment packs are measured by weight (not volume) and are designed to be added to 100% solids epoxy. 1 pigment pack should be added to 1 ¼ gallon of an epoxy base. Mix thoroughly for 3 min.utes to insure proper dispersion. Cohills Pro Series® Metal Essence pigment packs may b used in other clear vehicles such as polyurethane, acrylic sealers and waterborne epoxies, all with different effects.
It is necessary that we reserve the right to allow for reasonable variations of application. Printed colors show approximate color without affect of dispersing techniques, finishing techniques or application procedure. Variation of application will also affect the final appearance. It is highly recommended that you do a sample test area before installation
On Day 2, the primer has mechanically bonded to the concrete. Before applying the top coat in your chosen color, the primer is lightly sanded either mechanically or by hand which removes any unwanted foreign debris trapped in the drying process and smoothes the surface - Photo 1. Photo 2 shows the top coat being rolled on. If you requested additional floor treatments, such as color chips, these will be applied at this time. Depending upon your custom options and floor treatments the floor will be lightly sanded again to smooth the color chips, and to give the floor a smoother appearance. After sanding and vacuuming, a clear coat is applied (Photo 1) along with final cleaning and detailing. Photo 2 shows the completed project which after 24 hours will be cured sufficiently for foot traffic. In 72 hours your new floor is completely cured and ready for your vehicles and household items - Photo 3.
The color selector is designed to assist you in making your selection for Cohills Pro Series® Metal Essence Metallic epoxy colors. Cohills Pro Series® Metallic pigment packs are measured by weight (not volume) and are designed to be added to 100% solids epoxy. 1 pigment pack should be added to 1 ¼ gallon of an epoxy base. Mix thoroughly for 3 min.utes to insure proper dispersion. Cohills Pro Series® Metal Essence pigment packs may b used in other clear vehicles such as polyurethane, acrylic sealers and waterborne epoxies, all with different effects.
It is necessary that we reserve the right to allow for reasonable variations of application. Printed colors show approximate color without affect of dispersing techniques, finishing techniques or application procedure. Variation of application will also affect the final appearance. It is highly recommended that you do a sample test area before installation